Weekend · compact 12V system
A compact 12.8V 100Ah LiFePO4 starting point for essential RV loads, shorter trips and space-conscious installations.
01 · Use case
Use the vehicle, daily energy, charging access and travel pattern to decide whether this battery platform belongs on the shortlist.
Where it starts to fit
02 · Technical baseline
These values are taken from the current published product reference. The approved quotation and signed specification control the production order.
Electrical, mechanical and environmental values marked for confirmation remain outside the approved production specification until confirmed in writing.
| Battery chemistry | LiFePO4 prismatic cells | Integrated BMS | Yes |
|---|---|---|---|
| Nominal voltage | 12.8V | Operating voltage | 10–14.6V |
| Rated capacity / energy | 100Ah / 1280Wh | Published cycle life | >4000 cycles* |
| Recommended / max charge | 50A / 50A | Charge voltage | 14.6V, CCCV/IU |
| Continuous discharge | 100A | Short-duration cut-off reference | 310A (200–500ms)* |
| Dimensions | 260 × 168 × 209mm 206mm excluding terminals | Weight | Approx. 10kg* |
| Discharge / charge temperature | −20–60°C / 0–55°C | Storage temperature | −5–35°C |
| Published enclosure rating | IP67* | Case / terminals | ABS / M8 |
| Monitoring | Bluetooth 5.0 smartphone app | Published interconnection | Up to 4 series / 4 parallel* |
*Final confirmation required: cycle-life test conditions, short-duration current, weight tolerance, IP test evidence, app version and series/parallel rules must be stated in the approved project documents.
03 · Electrical review
Compatibility is approved against the complete system, not inferred from voltage, capacity or rated output alone.
Do not select by capacity alone
Review points
04 · Mechanical review
Final installation approval depends on the actual enclosure, access, restraint, cabling and operating environment.
Published reference: 260 × 168 × 209mm / 206mm excluding terminals. Confirm production tolerance and required service clearance.
Published reference: Approx. 10kg*. Confirm payload, support structure and restraint method.
Confirm terminal type, polarity, terminal clearance, cable bend radius, fuse position and service access.
Confirm approved orientation, restraint method, vibration exposure and access for inspection or replacement. Confirm temperature, moisture, dust and ventilation conditions.
05 · Evidence pack
Document status follows the exact approved model, market version and production configuration. Similar-model reports are not treated as evidence.
Issued against the approved electrical, mechanical and market configuration.
Final enclosure, terminals or sockets, clearances and tolerances must match the approved sample.
Report identity and battery configuration must be verified before order or transport planning.
Prepared around the approved charging, protection, mounting and commissioning plan.
Available only after BMS and monitoring option review.
06 · Project review
Send the equipment already in the system, intended loads, installation space and destination market. Outravira will identify confirmed matches, open risks and the next evidence required.