Core 24V · higher energy
A 25.6V 100Ah LiFePO4 platform for higher-energy 24V RV and off-grid briefs where recharge capacity, inverter demand and installation space are engineered together.
01 · Use case
Use the vehicle, daily energy, charging access and travel pattern to decide whether this battery platform belongs on the shortlist.
Where it starts to fit
02 · Technical baseline
These are current public reference values for shortlist work. The approved quotation and signed specification control the production order.
Electrical, mechanical and environmental values marked for confirmation remain outside the approved production specification until confirmed in writing.
| Battery chemistry | LiFePO4 prismatic cells | Integrated BMS | Yes |
|---|---|---|---|
| Nominal voltage | 25.6V | Rated capacity / energy | 100Ah / 2560Wh |
| Published continuous discharge | 100A* | Monitoring | Bluetooth 4.0 |
| Dimensions | 522 × 240 × 218mm | Weight | 21.6kg |
| Published interconnection | Up to 2 series / 4 parallel* | Charge settings | To be confirmed in signed specification |
| Terminals / enclosure rating | To be confirmed | Operating temperatures | To be confirmed |
*Final confirmation required: discharge conditions, charge settings, BMS thresholds, terminal details, enclosure rating, app version and series/parallel rules must be stated in the approved project documents.
03 · Electrical review
Compatibility is approved against the complete system, not inferred from voltage, capacity or rated output alone.
Capacity does not prove compatibility
Review points
04 · Mechanical review
Final installation approval depends on the actual enclosure, access, restraint, cabling and operating environment.
Published reference: 522 × 240 × 218mm. Confirm production tolerance and required service clearance.
Published reference: 21.6kg. Confirm payload, support structure and restraint method.
Confirm terminal type, polarity, terminal clearance, cable bend radius, fuse position and service access.
Confirm approved orientation, restraint method, vibration exposure and access for inspection or replacement. Confirm temperature, moisture, dust and ventilation conditions.
05 · Evidence pack
Document status follows the exact approved model, market version and production configuration. Similar-model reports are not treated as evidence.
Issued against the approved electrical, mechanical and market configuration.
Final enclosure, terminals or sockets, clearances and tolerances must match the approved sample.
Report identity and battery configuration must be verified before order or transport planning.
Prepared around the approved charging, protection, mounting and commissioning plan.
Available only after BMS and monitoring option review.
06 · Project review
Send the equipment already in the system, intended loads, installation space and destination market. Outravira will identify confirmed matches, open risks and the next evidence required.