RV & Remote Work · core portable power
A 1000W, 998Wh LiFePO4 pure sine wave portable power platform for RV accessories, Starlink, mobile offices and field electronics.
01 · Use case
Use the load list, runtime, recharge access and mobility requirement to decide whether this portable platform belongs on the shortlist.
Where it starts to fit
02 · Technical baseline
These values follow the currently selected supplier listing variant. The approved quotation and signed specification control the production order.
Destination AC version, ports, charging limits and values marked for confirmation remain outside the approved production specification until confirmed in writing.
| Battery chemistry | LiFePO4 | Rated output | 1000W |
|---|---|---|---|
| Listed battery energy | 998Wh | Inverter waveform | Pure sine wave |
| Charging sources | AC adaptor / solar | Solar controller | PWM solar control |
| Published features | Type-C / flashlight | Protection | Built-in smart BMS* |
| Dimensions | 320 × 200 × 145mm | Weight | To be confirmed |
| AC voltage / frequency / socket | To be confirmed | Peak output / port ratings | To be confirmed |
| Solar input / charge time | To be confirmed | UPS / EPS switching | To be confirmed |
*Final confirmation required: exact AC voltage, frequency, socket, charger, individual port ratings, peak output, solar and AC input limits, charge time, weight, UPS/EPS behavior, BMS limits, warranty and compliance documents must be fixed in the signed project specification.
03 · Electrical review
Compatibility is approved against the complete system, not inferred from voltage, capacity or rated output alone.
Check the system before selection
Review points
04 · Mechanical review
Final installation approval depends on the actual enclosure, access, restraint, cabling and operating environment.
Published reference: 320 × 200 × 145mm. Confirm production tolerance and required service clearance.
Published reference: To be confirmed. Confirm payload, support structure and restraint method.
Confirm socket version, connector access, cable routing, control clearance and safe ventilation around the enclosure.
Confirm operating position, wheel or handle clearance, restraint during transport and access for inspection. Confirm temperature, moisture, dust and ventilation conditions.
05 · Evidence pack
Document status follows the exact approved model, market version and production configuration. Similar-model reports are not treated as evidence.
Issued against the approved electrical, mechanical and market configuration.
Final enclosure, terminals or sockets, clearances and tolerances must match the approved sample.
Report identity and battery configuration must be verified before order or transport planning.
Prepared around the approved charging, protection, mounting and commissioning plan.
Reviewed only where the selected platform exposes a supported data interface.
06 · Project review
Send the equipment already in the system, intended loads, installation space and destination market. Outravira will identify confirmed matches, open risks and the next evidence required.