High-Capacity Mobile Power · fast recharge platform
A 3200W, 3072Wh LiFePO4 pure sine wave wheeled platform with high-power AC and solar charging references for demanding mobile and off-grid projects.
01 · Use case
Use the load list, runtime, recharge access and mobility requirement to decide whether this portable platform belongs on the shortlist.
Where it starts to fit
02 · Technical baseline
Values below are the selected 220V / 50Hz baseline and must be converted into a signed destination-market specification.
Destination AC version, ports, charging limits and values marked for confirmation remain outside the approved production specification until confirmed in writing.
| Battery chemistry | LiFePO4 | Rated output | 3200W |
|---|---|---|---|
| Listed battery energy | 3072Wh | Inverter waveform | Pure sine wave |
| AC baseline | 220V / 50Hz | Vehicle outlet | 12V / 120W |
| AC charging input | Up to 2200W | Solar input | 40–450V / max 10A / 400–4500W |
| Solar controller | MPPT solar control | UPS | Published UPS function* |
| Dimensions | 420 × 260 × 340mm | Mobility | Wheels and pull handle |
| USB reference | USB-A / Type-C; ratings to confirm | Weight | To be confirmed |
*Final confirmation required: socket version, charging limits, connector, individual port ratings, peak output, charge time, UPS transfer time and supported loads, BMS limits, weight, warranty, MOQ, lead time and compliance evidence must be fixed in the signed project specification.
03 · Electrical review
Compatibility is approved against the complete system, not inferred from voltage, capacity or rated output alone.
Compatibility comes first
Review points
04 · Mechanical review
Final installation approval depends on the actual enclosure, access, restraint, cabling and operating environment.
Published reference: 420 × 260 × 340mm. Confirm production tolerance and required service clearance.
Published reference: To be confirmed. Confirm payload, support structure and restraint method.
Confirm socket version, connector access, cable routing, control clearance and safe ventilation around the enclosure.
Confirm operating position, wheel or handle clearance, restraint during transport and access for inspection. Confirm temperature, moisture, dust and ventilation conditions.
05 · Evidence pack
Document status follows the exact approved model, market version and production configuration. Similar-model reports are not treated as evidence.
Issued against the approved electrical, mechanical and market configuration.
Final enclosure, terminals or sockets, clearances and tolerances must match the approved sample.
Report identity and battery configuration must be verified before order or transport planning.
Prepared around the approved charging, protection, mounting and commissioning plan.
Reviewed only where the selected platform exposes a supported data interface.
06 · Project review
Send the equipment already in the system, intended loads, installation space and destination market. Outravira will identify confirmed matches, open risks and the next evidence required.